Windsor CSCM26SP Instructions d'exploitation télécharger pdf (Page 41)

Maintenance

Replacing or Installing Scrub Brushes -

Cylindrical

1. Turn machine function dial to transport mode,

allowing deck to return to “up” position. Turn the

machine power off.

FOR SAFETY: Before leaving or servicing the

machine; stop on level surface, turn OFF machine

and remove key.

2. On right and left sides of deck, turn both brush and

skirt releases 1/4 turn counter-clockwise.

3. Swing deck skirts out. Remove brush end caps.

Slide brushes out the sides of deck.

4. To reinstall, slide brushes into deck. Replace

brush end caps. Lift end cap up and turn brush

release 1/4 turn clockwise, locking brush in place.

Swing deck skirt back to deck. Turn skirt release

1/4 turn clockwise, locking skirt into place.

NOTE: Check that brush end cap is properly secured

into deck housing. Check that brush is suspended off

ground while deck is in “up” position.

86367610 Chariot CS26

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 152 153

Pas de commentaire

Windsor CSCM26SP Instructions d'exploitation Page 41