Windsor COMDUX Instructions d'exploitation télécharger pdf (Page 42)

Maintenance

Drive Assembly

Drive Motor Carbon Brush Replacement

Do not use a pressure washer to clean around the

motors. Use tap pressure only.

N’utilisez pas de nettoyeur haute pression pour

nettoyer autour des moteurs des brosses. Utilisez

seulement la pression du robinet.

FOR SAFETY: Before leaving or servicing machine,

stop on a level surface, turn off machine and

remove key.

1. Disconnect batteries from machine.

2. Disconnect the electrical connection to the traction

motor.

3. Remove brush cap.

4. Release brush from spring tension. Remove screw

connecting brush wire lead to brush holder. Clean

brush holder to insure free movement.

5. Install new brush and reinstall connecting screw

and lead.

6. When all new brushes are installed. Place all in

retracted position, held into brush holder by spring

tension.

7. Carefully replace brush cap.

86400200 Operators Manual - Commodore Duo

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48 49

Pas de commentaire

Windsor COMDUX Instructions d'exploitation Page 42