Windsor NUWAV UA Instructions d'exploitation télécharger pdf (Page 20)

Maintenance

Remove Vac Motor And Filters

1. Unplug power cord.

2. Open cover.

3. Remove (6) screws from vacuum motor retaining

plate.

4. Remove (8) screws from vac motor brackets, (4)

each bracket.

5. Lift vacuum motors out of machine body.

Vacuum Motor Carbon Brushes

Replacement

Carbon

Brushes

If armature commutator is grooved, extremely pitted

or not concentric, the motor will need to be replaced

or sent to a qualified service center.

Important:

These brushes wear quicker as the length shortens

due to increased heat. Spring inside brush housing

will damage motor if brushes are allowed to wear

away completely.

Periodically check the length of the carbon brushes.

Replace both carbon brushes when either is less

than 3/8" (9.5mm) long.

86011370 NUWAVE

[9.5mm]

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 49 50

Pas de commentaire

Windsor NUWAV UA Instructions d'exploitation Page 20